# Limits

Source: https://ballistic.app/docs/reference/limits/

After this, you'll know the exact wallet, supply, rate and automation limits Ballistic enforces, per chain and launch mode.

A Ballistic Block-0 launch ends with its supply spread over up to 158 wallets on pump.fun and StonkFun and 101 on Pons and flap.sh.

Step one is the launch itself: the token’s creation, the deployer’s dev buy and up to 2 buyer wallets’ buys go out together, all or nothing (3 wallets). Step two follows straight after: the buyers’ supply is handed on to your holder wallets, which is where it stays.

Every number on this page is a limit the app enforces, read from the code that ships to production. Checked on 2026-11-18.

## Wallets in a launch [#wallets-in-a-launch]

A Block-0 launch works in two steps, and the two numbers answer different questions.

1. **The launch.** Three wallets buy: the dev wallet and 2 buyer wallets. Their buys go out with the token creation, all or nothing. The 2 buyers carry the whole holder supply between them. This is the same on every launchpad.
2. **The hand-off.** The supply the buyers bought is handed on to your holder wallets. These are the wallets that hold the supply once the launch has finished. The dev wallet keeps its own buy.

| Launchpad | Holder wallets you can set | Most holder wallets today | Most wallets holding supply |
|---|---|---|---|
| pump.fun (Solana) | 1 to 300 | 158 | 158 |
| StonkFun (Solana) | 1 to 300 | 158 | 158 |
| flap.sh (BNB Chain) | 2 to 100 | 100 | 101 |
| Pons (Robinhood Chain) | 2 to 100 | 100 | 101 |

The last column counts the holder wallets plus the dev wallet when it makes a dev buy. On Solana the dev buy comes out of the same supply limit as the holder supply, so at the ceiling there is no room for one and the count is the holder ceiling itself. On flap.sh and Pons the dev buy sits on top of 100 holder wallets.

On Solana the launch goes out as one bundle of 4 transactions: the create with the dev buy, one buy per buyer wallet, and a tip. On flap.sh and Pons it is one transaction.

A buy that two buyer wallets cannot carry is refused. It is never made smaller for you. On flap.sh and Pons the two buyers split the buy evenly, and per-wallet percentages are refused.

### Holder wallets on Solana [#holder-wallets-on-solana]

- Each holder wallet takes a random share of between 0.5% and 2% of total supply.
- The holder count has to fit that band. With 12% holder supply, the default, the count can be 6 to 24. A count the band cannot carry is refused, not adjusted.
- The band also sets the ceiling a launch can reach. A pump.fun or StonkFun launch can buy at most 79% of supply, dev buy included. With no dev buy all 79% goes to holder wallets, and 79% divided by 0.5% is 158 holder wallets. At that ceiling every holder gets exactly 0.5%, so the shares are identical, not random. The app accepts a count up to 300, but no launchpad's supply limit reaches it today.
- **Auto** picks a count that gives each holder wallet about 1.5% to 1.9% of supply on average, never fewer than 4 wallets and never more than 150. With the default 12% holder supply that is 7 or 8 wallets.
- Every wallet in the plan needs on-chain history, or must come from the [Marketplace](https://ballistic.app/docs/wallets/marketplace/). If you are short, the plan is refused and tells you by how many wallets.
- A Solana plan also uses a small number of pass-through wallets between the buyers and the holders, so it needs a few more wallets with history than the holder count. The Settings step shows the total before you save.

### Holder wallets on flap.sh and Pons [#holder-wallets-on-flapsh-and-pons]

- The count runs from 2 to 100. A count outside that range is refused.
- The 2 buyers split the buy evenly.

See [The wash](https://ballistic.app/docs/launch/the-wash/) for how the hand-off runs on Solana.

### Reserve [#reserve]

A Reserve launch uses one custody wallet and the dev wallet. The custody wallet buys at launch and its supply is parked in one position, so there are no holder wallets to set. On Solana the custody wallet is funded with about 0.17 SOL of running costs on top of the buy, and the unspent part comes back when you withdraw. See [Reserve mode](https://ballistic.app/docs/launch/reserve-mode/).

## Supply and buy limits [#supply-and-buy-limits]

Holder supply plus the dev buy is the supply a launch buys, and it has to stay inside what the launchpad's curve can sell. The field in the app shows the live limit, and the backend prices the real curve again before it accepts the plan.

| Launchpad | Block-0 supply bought, dev buy included (default / max) | Reserve holder supply (default / max) | Reserve buy ceiling | Dev buy |
|---|---|---|---|---|
| pump.fun | 14% / 79% | 3% / 79% | 85 SOL | Optional |
| StonkFun | 14% / 79% | 3% / 80% | 85 SOL | Optional |
| flap.sh | 14% / 80% | 3% / 80% | 16 BNB | Optional |
| Pons | 14% / 71% | 5% / 71% | 4.2 ETH | Required, above 0 |

By default a Block-0 launch buys 14%: a 2% dev buy and 12% for the holder wallets. The maximum covers both together, so the most the holder wallets can take is the maximum less the dev buy. The Reserve dev buy defaults to 0%, except on Pons.

## Pairs [#pairs]

| Launchpad | Block-0 | Reserve |
|---|---|---|
| pump.fun | SOL or a listed pair | SOL or a listed pair |
| StonkFun | A listed pair. SOL is not offered | A listed pair. SOL is not offered |
| flap.sh | BNB only | BNB only |
| Pons | ETH only | ETH or a listed pair asset |

A pair does not change the wallet limits above. A pump.fun launch paired with USDC has the same dev wallet, 2 buyer wallets and holder wallets as one paired with SOL. See [Pairs](https://ballistic.app/docs/launch/pairs/).

## Wallets on your account [#wallets-on-your-account]

| Limit | Value |
|---|---|
| Wallets created per request | 100 |
| Active wallets you can create | 300 per chain. Archived wallets do not count |
| Primary wallets | One per chain |
| Private key exports | 3 requests per 10 minutes. Each reveal token works once and lasts 60 seconds |

See [Wallet Manager](https://ballistic.app/docs/wallets/wallet-manager/).

## Rate limits [#rate-limits]

These apply per account.

| Action | Limit |
|---|---|
| Launch | 5 per minute, 50 per hour |
| Buy | 300 per minute |
| Sell | 300 per minute. Sells of one token run one at a time |
| Airdrop | 10 per minute |
| Withdraw | 10 per minute, 50 per hour |

## Funding [#funding]

| Limit | Value |
|---|---|
| Funding window | Instant, or up to 24 hours |
| Vary amounts | 5%, 10%, 20% or 30%, where the page offers it |
| Withdrawal confirmation code | Required at 1 SOL or the equivalent, and above. Max, percentage and token withdrawals always need it. The code lasts 15 minutes and allows 5 attempts |

See [Fund your launch](https://ballistic.app/docs/launch/funding/) and [Withdraw](https://ballistic.app/docs/after-launch/withdraw/).

## Automation [#automation]

| Tool | Limit |
|---|---|
| Auto-sell and auto-buy | Each run lasts 3 hours, then stops |
| DCA interval | Whole seconds, up to 90 days |
| DCA sell size | 0.01% to 99% per order |
| Holder Booster | 50, 100, 500, 1,000, 2,500, 5,000 or 10,000 recipients |
| Holder Booster pacing | Immediate, 30 minutes, 1 hour, 3 hours, 6 hours or 1 day |

See [Trading tools](https://ballistic.app/docs/trade/trading-tools/) for which tool runs on which chain.

## Launchpad numbers [#launchpad-numbers]

These belong to the launchpad, not to Ballistic, and the launchpad can change them. Ballistic reads the live values at launch.

| Launchpad | Number | Value in Ballistic's config, checked 2026-11-17 |
|---|---|---|
| Pons | Creation fee | 0.0005 ETH |
| Pons | Curve fee on each buy and sell | 1% |
| Pons | Creator tax you can add | 0% to 9%, in 0.5% steps |
| Pons | Curve completes at | 4.2 ETH |
| flap.sh | Buy tax and sell tax | 1%, 3%, 5% or 10% each. flap.sh refuses a token with none |

## What can go wrong [#what-can-go-wrong]

| Symptom | Likely cause | Fix |
|---|---|---|
| The plan is refused for the holder count | The count does not fit the 0.5% to 2% share per holder | Use **Auto**, or pick a count between holder supply divided by 2 (rounded up) and holder supply divided by 0.5 (rounded down). |
| The plan says you are short of wallets | Not enough wallets with on-chain history | Buy wallets on the [Marketplace](https://ballistic.app/docs/wallets/marketplace/), or lower the holder count. |
| "Maximum 300 wallets" when creating wallets | You reached the cap for that chain | Archive wallets you no longer use, then create new ones. |
| A launch, withdraw or airdrop is refused for a while | You hit a rate limit | Wait a minute and try again. |

## Related

- [Launch modes](https://ballistic.app/docs/launch/launch-modes/)
- [Pairs](https://ballistic.app/docs/launch/pairs/)
- [Fees](https://ballistic.app/docs/reference/fees/)
- [FAQ](https://ballistic.app/docs/reference/faq/)
