Skip to content

Limits and capabilities

Ballistic limits: wallets per launch, holders, bundle and account

A Ballistic Block-0 launch ends with its supply spread over up to 158 wallets on pump.fun and StonkFun and 101 on Pons and flap.sh. The launch itself carries 3 wallets, all or nothing, then hands the supply to holder wallets. A Reserve launch uses one custody wallet. An account holds 300 generated wallets per chain.

Wallets per launch, by launchpad and pair

A Block-0 launch has two steps, and each has its own number. Step one is the launch itself: the token’s creation, the deployer’s dev buy and up to 2 buyer wallets’ buys go out together, all or nothing (3 wallets). Step two follows straight after: the buyers’ supply is handed on to your holder wallets, which is where it stays. The number that describes the finished launch is the second one: how many wallets hold the supply. A launch distributes to up to 158 holder wallets on pump.fun and StonkFun and 100 on Pons and flap.sh. A Solana plan accepts up to 300 holder wallets and gives each one 0.5% to 2% of total supply, so the supply a launch can buy sets the working ceiling (79% on pump.fun and StonkFun); at the ceiling every wallet holds 0.5%. On Pons and flap.sh a plan takes 2 to 100 holder wallets and splits the holders buy equally.

The count is the holder wallets plus the deployer, when it makes a dev buy. On Solana the dev buy comes out of the same supply ceiling as the holders buy, so the largest count there is the holder ceiling itself. On Pons and flap.sh the dev buy sits on top of 100 holder wallets.

Wallets per launch by launchpad, pair and mode
Launchpad and modePairWallets holding supply after the launchHolder walletsWallets in the launch itself
pump.fun Block-0SOL, USDC, a stock or another listed pairUp to 158Up to 158. Each wallet holds 0.5% to 2% of supply; at the ceiling every wallet holds 0.5%Deployer + up to 2 buyers (3 wallets)
pump.fun ReserveSOL, USDC, a stock or another listed pair1 custody walletNone: the supply is parked in one positionDeployer + 1 custody wallet
Pons Block-0ETH onlyUp to 1012 to 100, in equal sharesDeployer + up to 2 buyers (3 wallets)
Pons ReserveETH, or a tokenized stock or USDG pair1 custody walletNone: the supply is parked in one positionDeployer + 1 custody wallet
flap.sh Block-0BNBUp to 1012 to 100, in equal sharesDeployer + up to 2 buyers (3 wallets)
flap.sh ReserveBNB1 custody walletNone: the supply is parked in one positionDeployer + 1 custody wallet
StonkFun Block-0A listed pair (no plain SOL pair)Up to 158Up to 158. Each wallet holds 0.5% to 2% of supply; at the ceiling every wallet holds 0.5%Deployer + up to 2 buyers (3 wallets)
StonkFun ReserveA listed pair (no plain SOL pair)1 custody walletNone: the supply is parked in one positionDeployer + 1 custody wallet

You choose the holder count at setup, inside these limits. On Solana each holder wallet’s share is drawn at random, from 0.5% to 2% of total supply, so a count the holders buy cannot fill at that share is refused. At the largest count there is no room to vary: at the ceiling every wallet holds 0.5%. The backend checks the plan against the real curve when it is saved. A plan it cannot fill is refused by name. It is never made smaller.

These are the limits the code enforces. They are not a record of use: a limit being available on a launchpad does not mean a launch of that size has run there.

Inside the launch

The launch itself is small on purpose. 2 buyer wallets and the deployer buy with the creation, on every launchpad and chain. On Solana that is one atomic bundle. On BNB Chain and Robinhood Chain it is one transaction. The rest of the supply reaches holder wallets through the hand-off described on the Block-0 page: up to 300 of them by the Solana plan’s rule and up to 100 on the EVM launchpads.

Launch and bundle limits
LimitValueApplies to
Buyer wallets inside a Block-0 launch2, plus the deployer’s dev buyEvery launchpad and chain
Transactions per bundle4 on the default relay: the creation with the dev buy, up to 2 buys, the tipSolana
Transactions in an EVM Block-0 launch1Pons and flap.sh
Holder wallets a plan acceptsUp to 300Solana
Share of supply per holder wallet0.5% to 2%, drawn at random for each wallet when the count leaves roomSolana
Holder wallets a plan accepts2 to 100, in equal sharesPons and flap.sh
Funding windowUp to 24 hoursBlock-0 with a funding window

If you compare tools by wallets buying in the first block, Ballistic’s number is 2 plus the deployer, and several tools publish a larger one. The design trades that number for a launch that goes out whole and a supply that ends up spread over up to 158 wallets. Which matters more depends on your launch. The comparison page shows the published numbers side by side.

Reserve launches

A Reserve launch buys through one custody wallet, plus the deployer. The supply is not spread over holder wallets: it is parked in one liquidity position above the market. That is why the holder wallet column in the table above reads none for every Reserve row.

Account wallet caps

Wallet caps per account
LimitValue
Wallets generated in one request100
Active generated wallets300 per chain, per account
Primary walletsOne per chain
Wallets a Solana Block-0 plan will usePool wallets that already have on-chain history, or wallets bought from the marketplace

You generate wallets in the wallet manager, up to 100 at a time. A large Solana Block-0 plan can need more wallets than a new account has ready, because the plan only uses pool wallets that already have on-chain history or wallets bought from the marketplace. If the pool is short, setup refuses the plan and names the shortfall.

Supply and buy size

Supply and Reserve buy ceilings by launchpad
LaunchpadMost supply a launch can buyLargest Reserve buy
pump.fun79%85 SOL
Pons71%4.2 ETH
flap.sh80%16 BNB
StonkFun79%85 SOL

The dev buy and the holders buy together must stay inside the launchpad’s curve. The backend walks the real curve when the plan is saved and refuses a plan it cannot fill.

Rate limits

Rate limits per account
ActionPer account
Launch5 a minute, 50 an hour
Buy300 a minute
Sell300 a minute
Airdrop10 a minute
Withdraw10 a minute, 50 an hour

Sells for one token run one at a time, so two sells of the same token queue instead of racing.

Questions

How many wallets can a Ballistic launch use?

A Ballistic Block-0 launch ends with its supply spread over up to 158 wallets on pump.fun and StonkFun and 101 on Pons and flap.sh. 3 wallets buy inside the launch itself, the deployer and up to 2 buyers, and the supply is handed on to holder wallets straight after.

How many wallets are in the atomic bundle?

The deployer and up to 2 buyer wallets, on every launchpad and chain. On Solana the bundle is four transactions on the default relay: the creation with the dev buy, up to 2 buys and the tip.

How many holder wallets can a launch use?

A launch distributes to up to 158 holder wallets on pump.fun and StonkFun and 100 on Pons and flap.sh. A Solana plan accepts up to 300 holder wallets and gives each one 0.5% to 2% of total supply, so the supply a launch can buy sets the working ceiling (79% on pump.fun and StonkFun); at the ceiling every wallet holds 0.5%. On Pons and flap.sh a plan takes 2 to 100 holder wallets and splits the holders buy equally. You set the count at setup. Setup checks the plan against the curve and your wallet pool, and refuses a plan it cannot fill.

How many wallets can one account hold?

300 active generated wallets per chain, created up to 100 per request, and one primary wallet per chain.

How many wallets does a Reserve launch use?

One custody wallet, plus the deployer. The supply is parked in one liquidity position instead of being spread over holder wallets.

Does the pair change the wallet limits?

Not on Ballistic. A pump.fun launch paired with SOL, USDC or a stock has the same wallet limits. Pons Block-0 pairs with ETH only and flap.sh pairs with BNB.

Last verified against the Ballistic code.