Skip to content
BallisticBallistic

Reference

Limits

After this, you'll know the exact wallet, supply, rate and automation limits Ballistic enforces, per chain and launch mode.

A Ballistic Block-0 launch ends with its supply spread over up to 158 wallets on pump.fun and StonkFun and 101 on Pons and flap.sh.

Step one is the launch itself: the token’s creation, the deployer’s dev buy and up to 2 buyer wallets’ buys go out together, all or nothing (3 wallets). Step two follows straight after: the buyers’ supply is handed on to your holder wallets, which is where it stays.

Every number on this page is a limit the app enforces, read from the code that ships to production. Checked on 2026-11-18.

Wallets in a launch

A Block-0 launch works in two steps, and the two numbers answer different questions.

  1. The launch. Three wallets buy: the dev wallet and 2 buyer wallets. Their buys go out with the token creation, all or nothing. The 2 buyers carry the whole holder supply between them. This is the same on every launchpad.
  2. The hand-off. The supply the buyers bought is handed on to your holder wallets. These are the wallets that hold the supply once the launch has finished. The dev wallet keeps its own buy.
LaunchpadHolder wallets you can setMost holder wallets todayMost wallets holding supply
pump.fun (Solana)1 to 300158158
StonkFun (Solana)1 to 300158158
flap.sh (BNB Chain)2 to 100100101
Pons (Robinhood Chain)2 to 100100101

The last column counts the holder wallets plus the dev wallet when it makes a dev buy. On Solana the dev buy comes out of the same supply limit as the holder supply, so at the ceiling there is no room for one and the count is the holder ceiling itself. On flap.sh and Pons the dev buy sits on top of 100 holder wallets.

On Solana the launch goes out as one bundle of 4 transactions: the create with the dev buy, one buy per buyer wallet, and a tip. On flap.sh and Pons it is one transaction.

A buy that two buyer wallets cannot carry is refused. It is never made smaller for you. On flap.sh and Pons the two buyers split the buy evenly, and per-wallet percentages are refused.

Holder wallets on Solana

  • Each holder wallet takes a random share of between 0.5% and 2% of total supply.
  • The holder count has to fit that band. With 12% holder supply, the default, the count can be 6 to 24. A count the band cannot carry is refused, not adjusted.
  • The band also sets the ceiling a launch can reach. A pump.fun or StonkFun launch can buy at most 79% of supply, dev buy included. With no dev buy all 79% goes to holder wallets, and 79% divided by 0.5% is 158 holder wallets. At that ceiling every holder gets exactly 0.5%, so the shares are identical, not random. The app accepts a count up to 300, but no launchpad's supply limit reaches it today.
  • Auto picks a count that gives each holder wallet about 1.5% to 1.9% of supply on average, never fewer than 4 wallets and never more than 150. With the default 12% holder supply that is 7 or 8 wallets.
  • Every wallet in the plan needs on-chain history, or must come from the Marketplace. If you are short, the plan is refused and tells you by how many wallets.
  • A Solana plan also uses a small number of pass-through wallets between the buyers and the holders, so it needs a few more wallets with history than the holder count. The Settings step shows the total before you save.

Holder wallets on flap.sh and Pons

  • The count runs from 2 to 100. A count outside that range is refused.
  • The 2 buyers split the buy evenly.

See The wash for how the hand-off runs on Solana.

Reserve

A Reserve launch uses one custody wallet and the dev wallet. The custody wallet buys at launch and its supply is parked in one position, so there are no holder wallets to set. On Solana the custody wallet is funded with about 0.17 SOL of running costs on top of the buy, and the unspent part comes back when you withdraw. See Reserve mode.

Supply and buy limits

Holder supply plus the dev buy is the supply a launch buys, and it has to stay inside what the launchpad's curve can sell. The field in the app shows the live limit, and the backend prices the real curve again before it accepts the plan.

LaunchpadBlock-0 supply bought, dev buy included (default / max)Reserve holder supply (default / max)Reserve buy ceilingDev buy
pump.fun14% / 79%3% / 79%85 SOLOptional
StonkFun14% / 79%3% / 80%85 SOLOptional
flap.sh14% / 80%3% / 80%16 BNBOptional
Pons14% / 71%5% / 71%4.2 ETHRequired, above 0

By default a Block-0 launch buys 14%: a 2% dev buy and 12% for the holder wallets. The maximum covers both together, so the most the holder wallets can take is the maximum less the dev buy. The Reserve dev buy defaults to 0%, except on Pons.

Pairs

LaunchpadBlock-0Reserve
pump.funSOL or a listed pairSOL or a listed pair
StonkFunA listed pair. SOL is not offeredA listed pair. SOL is not offered
flap.shBNB onlyBNB only
PonsETH onlyETH or a listed pair asset

A pair does not change the wallet limits above. A pump.fun launch paired with USDC has the same dev wallet, 2 buyer wallets and holder wallets as one paired with SOL. See Pairs.

Wallets on your account

LimitValue
Wallets created per request100
Active wallets you can create300 per chain. Archived wallets do not count
Primary walletsOne per chain
Private key exports3 requests per 10 minutes. Each reveal token works once and lasts 60 seconds

See Wallet Manager.

Rate limits

These apply per account.

ActionLimit
Launch5 per minute, 50 per hour
Buy300 per minute
Sell300 per minute. Sells of one token run one at a time
Airdrop10 per minute
Withdraw10 per minute, 50 per hour

Funding

LimitValue
Funding windowInstant, or up to 24 hours
Vary amounts5%, 10%, 20% or 30%, where the page offers it
Withdrawal confirmation codeRequired at 1 SOL or the equivalent, and above. Max, percentage and token withdrawals always need it. The code lasts 15 minutes and allows 5 attempts

See Fund your launch and Withdraw.

Automation

ToolLimit
Auto-sell and auto-buyEach run lasts 3 hours, then stops
DCA intervalWhole seconds, up to 90 days
DCA sell size0.01% to 99% per order
Holder Booster50, 100, 500, 1,000, 2,500, 5,000 or 10,000 recipients
Holder Booster pacingImmediate, 30 minutes, 1 hour, 3 hours, 6 hours or 1 day

See Trading tools for which tool runs on which chain.

Launchpad numbers

These belong to the launchpad, not to Ballistic, and the launchpad can change them. Ballistic reads the live values at launch.

LaunchpadNumberValue in Ballistic's config, checked 2026-11-17
PonsCreation fee0.0005 ETH
PonsCurve fee on each buy and sell1%
PonsCreator tax you can add0% to 9%, in 0.5% steps
PonsCurve completes at4.2 ETH
flap.shBuy tax and sell tax1%, 3%, 5% or 10% each. flap.sh refuses a token with none

What can go wrong

SymptomLikely causeFix
The plan is refused for the holder countThe count does not fit the 0.5% to 2% share per holderUse Auto, or pick a count between holder supply divided by 2 (rounded up) and holder supply divided by 0.5 (rounded down).
The plan says you are short of walletsNot enough wallets with on-chain historyBuy wallets on the Marketplace, or lower the holder count.
"Maximum 300 wallets" when creating walletsYou reached the cap for that chainArchive wallets you no longer use, then create new ones.
A launch, withdraw or airdrop is refused for a whileYou hit a rate limitWait a minute and try again.